Fontes de tensão constante com DALI
Características do produto
- Available as single-channel or multi-channel with DT6 and DT8 in one device
- Dimming range: 0.1…100 % (for 50-80-160W) or 1…100 % (for 30W)
- Frequência da linha: 0 Hz | 50 Hz | 60 Hz
Benefícios do produto
- Ajuste de alimentação inteligente graças à tecnologia Smart
- Form factor for mounting on the cove or in luminaires
- No stroboscopic effect thanks to patented high PWM frequency management (> 2 kHz)
Equipamento / Acessórios
- Adequada para módulos de LED de 24 V
Produtos
| Nome do produto |
|
|
|
|
|
Ficha de dados do produto | ||
|---|---|---|---|---|---|---|---|---|
|
OTi DALI 30/220-240/24 1CH
|
30 W | Sim | 103,0 mm | 67,0 mm | 29,5 mm | ||
|
OTi DALI 50/220-240/24 1CH G3
|
50 W | Sim | 3460 mm | 320 mm | 220 mm | ||
|
OTi DALI 80/220-240/24 1CH G3
|
80 W | Sim | 3460 mm | 320 mm | 220 mm | ||
|
OTi DALI 160/220-240/24 1CH G3
|
160 W | Sim | 3000 mm | 500 mm | 350 mm | ||
|
OTi DALI 50/220-240/ 24 4CH DT6/8 G3
|
50 W | Sim | 3460 mm | 320 mm | 220 mm | ||
|
OTi DALI 80/220-240/ 24 4CH DT6/8 G3
|
80 W | Sim | 3460 mm | 320 mm | 220 mm | ||
|
OTi DALI 160/220-240/ 24 2CH DT6/8 G3
|
160 W | Sim | 3000 mm | 500 mm | 350 mm | ||
|
OTi DALI 50/220-240/24 1CH
|
50 W | Sim | 346,0 mm | 32,0 mm | 22,0 mm | ||
|
OTi DALI 80/220-240/24 1CH
|
80 W | Sim | 346,0 mm | 32,0 mm | 22,0 mm | ||
|
OTi DALI 160/220-240/24 1CH
|
160 W | Sim | 300,0 mm | 50,0 mm | 35,0 mm | ||
|
OTi DALI 50/220-240/24 4CHDT6/8
|
50 W | Sim | 346,0 mm | 32,0 mm | 22,0 mm | ||
|
OTi DALI 80/220-240/24 4CHDT6/8
|
80 W | Sim | 346,0 mm | 32,0 mm | 22,0 mm | ||
|
OTi DALI 160/220-240/24 2CHDT6/8
|
160 W | Sim | 300,0 mm | 50,0 mm | 35,0 mm |
Mais sobre a família de produtos
Áreas de aplicação
- Cove lighting, wall washer, corridor, handrail, luminous ceilings
Ecodesign regulation information:
Intended for use with LED modules.
The forward voltage of the LED light source shall be within the defined operating window of the control gear in all operating conditions including dimming if applicable.
Separate control gear and light sources must be disposed of at certified disposal companies in accordance with Directive 2012/19/EU (WEEE) in the EU and with Waste Electrical and Electronic Equipment (WEEE) Regulations 2013 in the UK. For this purpose, collection points for recycling centres and take-back systems (CRSO) are available from retailers or private disposal companies, which accept separate control gear and light sources free of charge. In this way, raw materials are conserved and materials are recycled.
Intended for use with LED modules.
The forward voltage of the LED light source shall be within the defined operating window of the control gear in all operating conditions including dimming if applicable.
Separate control gear and light sources must be disposed of at certified disposal companies in accordance with Directive 2012/19/EU (WEEE) in the EU and with Waste Electrical and Electronic Equipment (WEEE) Regulations 2013 in the UK. For this purpose, collection points for recycling centres and take-back systems (CRSO) are available from retailers or private disposal companies, which accept separate control gear and light sources free of charge. In this way, raw materials are conserved and materials are recycled.