ICUTRONIC FIT CS
Características do produto
- Tensão de alimentação: 220…240 V
- Frequência da linha: 50 Hz | 60 Hz
- Tensão da linha: 198…254 V
- Segurança conforme EN 61347-1, 61347-2-13, 62384
- Fixed output (no dimming)
Benefícios do produto
- Maior qualidade de luz graças à baixa corrente de saída
- Long lasting and high reliability
- Safety ensured by OSRAM (SELV)
Produtos
| Nome do produto |
|
|
|
|
|
Ficha de dados do produto | ||
|---|---|---|---|---|---|---|---|---|
|
|
IT FIT 20/220…240/500 CS
|
23…42 V | 150 / 200 / 250 / 300 / 350 / 400 / 450 / 500 mA | 97,0 mm | 43,0 mm | 29,5 mm | ||
|
IT FIT 30/220…240/700 CS
|
23…42 V | 350 / 400 / 450 / 500 / 550 / 600 / 650 / 700 mA | 97,0 mm | 43,0 mm | 29,5 mm | ||
|
IT FIT 40/220…240/1A0 CS
|
23…42 V | 700 / 750 / 800 / 850 / 900 / 950 / 1000 / 1050 mA | 97,0 mm | 43,0 mm | 29,5 mm | ||
|
IT FIT 20/220...240/500 CS I
|
23…42 V | 150 / 200 / 250 / 300 / 350 / 400 / 450 / 500 mA | 1450 mm | 430 mm | 280 mm | ||
|
IT FIT 30/220...240/700 CS I
|
23…42 V | 350 / 400 / 450 / 500 / 550 / 600 / 650 / 700 mA | 1450 mm | 430 mm | 280 mm | ||
|
IT FIT 40/220...240/1A0 CS I
|
23…42 V | 700 / 750 / 800 / 850 / 900 / 950 / 1000 / 1050 mA | 1450 mm | 430 mm | 280 mm |
Mais sobre a família de produtos
Áreas de aplicação
- Indicado para instalações de interior com SELV
- É possível a instalação e montagem independente através do Kit com serra-cabos
Ecodesign regulation information:
Intended for use with LED modules.
The forward voltage of the LED light source shall be within the defined operating window of the control gear in all operating conditions including dimming if applicable.
Separate control gear and light sources must be disposed of at certified disposal companies in accordance with Directive 2012/19/EU (WEEE) in the EU and with Waste Electrical and Electronic Equipment (WEEE) Regulations 2013 in the UK. For this purpose, collection points for recycling centres and take-back systems (CRSO) are available from retailers or private disposal companies, which accept separate control gear and light sources free of charge. In this way, raw materials are conserved and materials are recycled.
Intended for use with LED modules.
The forward voltage of the LED light source shall be within the defined operating window of the control gear in all operating conditions including dimming if applicable.
Separate control gear and light sources must be disposed of at certified disposal companies in accordance with Directive 2012/19/EU (WEEE) in the EU and with Waste Electrical and Electronic Equipment (WEEE) Regulations 2013 in the UK. For this purpose, collection points for recycling centres and take-back systems (CRSO) are available from retailers or private disposal companies, which accept separate control gear and light sources free of charge. In this way, raw materials are conserved and materials are recycled.