OT FIT 30/220-240/700 CS S MINI
Áreas de aplicação
- Adequado para luminárias de classes de proteção I e II
- Indicado para instalações de interior com SELV
Dados Técnicos
Dados elétricos
Tensão nominal de entrada
220 240 V
Frequência da rede
50/60 Hz
Tensão de entrada AC
198 264 V
Distorção harmónica total
< 10 %
Fator de potência λ
0,91C 0,95
Efficiency in full-load
89 %
Perda de potência
3.6 W
Corrente elétrica de entrada
13,4 A
Número máx. de ECG num circuito 10 A (B)
16
Número máx. de ECG num circuito 10 A (B)
26
Número máx. de ECG num circuito 16 A (B)
26
Número máx. de ECG num circuito 16 A (B)
43
Resistente a surto de tensão (F/N-Terra)
2 kV
Resistente a surto de tensão (F/N)
1 kV
Tensão nominal de saída
30 42 V
U-OUT (Tensão de funcionamento)
60 V
Tensão nominal de saída
550/600/650/700 mA
Tolerância da corrente de saída
±7.5 %
Default output current
700 mA
Variação corrente de saída (100 Hz)
< 3 %
Output PSTLM
≤1
Output SVM
≤0.4
Potência nominal de saída
16.5 29 W
Potência máxima de saída
29 W
Isolamento galvânico
SELV
Current set
DipSwitch
Isolação entre o primário e o secundário
SELV
Dimensões e peso
Peso do produto
90,20 g
Secção do cabo, primário
0,5 1,5 / 0,75 1,5 mm²
Secção do cabo, secundário
0,5 1,5 / 0,75 1,5 mm²
Comprimento máximo do cabo (entrada)
7 8 mm
Comprimento máximo do cabo (saída)
7 8 mm
Largura
35,0 mm
Comprimento
87,0 mm
Altura
22,0 mm
Cores e materiais
Material da caixa
Plástico
Temperaturas e condições de funcionamento
Temperatura ambiente
-20 +60 °C
Temperatura máxima no ponto TC
90 °C
Temperatura máx carcaça em caso de falha
110 °C
Temperatura de armazenagem
-20 80 °C
Humidade rel. admissível no funcionam.
5 85 %
Vida útil
Vida útil do reator
50000 h
Atributos
Dimerizável
Não
Proteção contra superaquecimento
Reversão automática
Proteção contra sobrecarga
Reversão automática
Protecção curto-circuito
Reversão automática
Resistente à ausência de carga
Sim
Intended for no-load operation
Não
Compr.máx.cabo p/ lâmpada/módulo LED
2,0 m
Indicada p. luminárias com cl. proteção
I / II
Tipo de conexão, entrada
Terminal de saída
Tipo de conexão, saída
Terminal de saída
Number of channels
1
Indicado para electrificação
Não
Programming
Programming device
DIPswitch
Normas e Certificações
Selo de aprovação
ENEC 05 / CCC / CE / RCM
Normas
Acc. IEC 61347-1/Acc. IEC 61347-2-13/Acc. IEC 62384/Acc. IEC 61000-3-2/Acc. IEC 61000-3-3/Acc. IEC 61547
Tipo de protecção
IP20
Grau de proteção
1/2
Dados logísticos
Código do material
85044083900
Environmental information
Information according Art. 33 of EU Regulation (EC) 1907/2006 (REACh)
Date of Declaration
01-12-2023
Primary Article Identifier
4062172013420
Candidate List Substance 1
Lead
CAS No. of substance 1
7439-92-1
Safe Use Instruction
The identification of the Candidate List substance is sufficient to allow safe use of the article.
Declaration No. in SCIP database
abbe2869-9a91-4476-87e6-342c6ffd9e93
Informações de embalagem
EAN |
Unidade |
Peça |
Dimensões |
Peso |
Volume |
---|---|---|---|---|---|
4062172013420 |
UNV
| 1 | 87mm x 35mm x 22mm | 90.00g | 0.07dm³ |
4062172013437 |
VS
| 20 | 187mm x 186mm x 67mm | 1980.00g | 2.33dm³ |
Downloads
Mais sobre a família de produtos
Características do produto
- Tensão de alimentação: 220 240 V
- Frequência da linha: 50 Hz | 60 Hz
- Tensão da linha: 198 264 V
- Segurança conforme EN 61347-1, 61347-2-13, 62384
Ecodesign regulation information:
Intended for use with LED modules.
The forward voltage of the LED light source shall be within the defined operating window of the control gear in all operating conditions including dimming if applicable.
Separate control gear and light sources must be disposed of at certified disposal companies in accordance with Directive 2012/19/EU (WEEE) in the EU and with Waste Electrical and Electronic Equipment (WEEE) Regulations 2013 in the UK. For this purpose, collection points for recycling centres and take-back systems (CRSO) are available from retailers or private disposal companies, which accept separate control gear and light sources free of charge. In this way, raw materials are conserved and materials are recycled.
Intended for use with LED modules.
The forward voltage of the LED light source shall be within the defined operating window of the control gear in all operating conditions including dimming if applicable.
Separate control gear and light sources must be disposed of at certified disposal companies in accordance with Directive 2012/19/EU (WEEE) in the EU and with Waste Electrical and Electronic Equipment (WEEE) Regulations 2013 in the UK. For this purpose, collection points for recycling centres and take-back systems (CRSO) are available from retailers or private disposal companies, which accept separate control gear and light sources free of charge. In this way, raw materials are conserved and materials are recycled.
Produtos
Nome do produto |
|
|
|
|
|
Ficha de dados do produto | ||
---|---|---|---|---|---|---|---|---|
OT FIT 8/220
240/180 CS S MINI
|
30 42 V | 90/120/150/180 mA | 87,0 mm | 30,0 mm | 20,0 mm | |||
OT FIT 8/220
240/180 CS I MINI
|
30 42 V | 90/120/150/180 mA | 104,0 mm | 30,0 mm | 26,0 mm | |||
OT FIT 15/220-240/350 CS S MINI
|
30 42 V | 225/250/325/350 mA | 87,0 mm | 35,0 mm | 22,0 mm | |||
OT FIT 20/220-240/500 CS S MINI
|
30 42 V | 400/450/475/500 mA | 87,0 mm | 35,0 mm | 22,0 mm | |||
OT FIT 30/220-240/700 CS S MINI
|
30 42 V | 550/600/650/700 mA | 87,0 mm | 35,0 mm | 22,0 mm | |||
OT FIT 38/220-240/900 CS S MINI
|
30 42 V | 800/850/875/900 mA | 87,0 mm | 35,0 mm | 22,0 mm |