OPTOTRONIC FIT LT2 LP
Características do produto
- Tensão de alimentação: 220…240 V
- Frequência da linha: 0 Hz | 50 Hz | 60 Hz
- Tensão da linha: 198…264 V
- Segurança conforme EN 61347-1, 61347-2-13, 62384
- Supressão de RI: até EN 55015
- Harmónica conforme EN 61000-3-2
- Imunidade conforme EN 61547
- Duração: até 100,000 h (temperatura a Tc = 65 °C, max. 10 % taxa de avaria)
- Ligação independente através de through-looping (depende da versão do produto)
Produtos
| Nome do produto |
|
|
|
|
|
Ficha de dados do produto | ||
|---|---|---|---|---|---|---|---|---|
|
|
OT FIT 15/220…240/500 LT2 LP
|
15…50 V | 150…500 mA | 103,0 mm | 67,0 mm | 22,5 mm | ||
|
OT FIT 25/220…240/700 LT2 LP
|
15…50 V | 300…700 mA | 103,0 mm | 67,0 mm | 22,5 mm | ||
|
OT FIT 40/220…240/1A0 LT2 LP
|
15…50 V | 500…1050 mA | 103,0 mm | 67,0 mm | 22,5 mm |
Mais sobre a família de produtos
Áreas de aplicação
- Instalação em sistemas de iluminação de emergência conforme IEC 61347-2-13, anexo J
- Indicado para instalações de interior com SELV
- Adequado para luminárias de classes de proteção I e II
Ecodesign regulation information:
Intended for use with LED modules.
The forward voltage of the LED light source shall be within the defined operating window of the control gear in all operating conditions including dimming if applicable.
Separate control gear and light sources must be disposed of at certified disposal companies in accordance with Directive 2012/19/EU (WEEE) in the EU and with Waste Electrical and Electronic Equipment (WEEE) Regulations 2013 in the UK. For this purpose, collection points for recycling centres and take-back systems (CRSO) are available from retailers or private disposal companies, which accept separate control gear and light sources free of charge. In this way, raw materials are conserved and materials are recycled.
Intended for use with LED modules.
The forward voltage of the LED light source shall be within the defined operating window of the control gear in all operating conditions including dimming if applicable.
Separate control gear and light sources must be disposed of at certified disposal companies in accordance with Directive 2012/19/EU (WEEE) in the EU and with Waste Electrical and Electronic Equipment (WEEE) Regulations 2013 in the UK. For this purpose, collection points for recycling centres and take-back systems (CRSO) are available from retailers or private disposal companies, which accept separate control gear and light sources free of charge. In this way, raw materials are conserved and materials are recycled.