OPTOTRONIC Intelligent – DALI LEDset LT2 (SELV)
Características do produto
- Frequência da linha: 0 Hz | 50 Hz | 60 Hz
- Tensão de alimentação: 220…240 V
Produtos
| Nome do produto |
|
|
|
|
|
Ficha de dados do produto | ||
|---|---|---|---|---|---|---|---|---|
|
OTi DALI 35/220…240/700 LT2 L G2
|
15…54 V | 200…700 mA | 360,0 mm | 30,0 mm | 21,0 mm | ||
|
|
OTi DALI 50/220…240/1A4 LT2 L G2
|
15…54 V | 600…1400 mA | 360,0 mm | 30,0 mm | 21,0 mm | ||
|
OTi DALI 80/220…240/1A6 LT2 L
|
20…54 V | 600…1550 mA | 360,0 mm | 30,0 mm | 21,0 mm | ||
|
OTi DALI 80/220…240/2A1 LT2 L
|
20…54 V | 1000…2100 mA | 360,0 mm | 30,0 mm | 21,0 mm |
Mais sobre a família de produtos
Áreas de aplicação
- Instalação em sistemas de iluminação de emergência conforme IEC 61347-2-13, anexo J
- Adequado para luminárias de classe de proteção I
Ecodesign regulation information:
Intended for use with LED modules.
The forward voltage of the LED light source shall be within the defined operating window of the control gear in all operating conditions including dimming if applicable.
Separate control gear and light sources must be disposed of at certified disposal companies in accordance with Directive 2012/19/EU (WEEE) in the EU and with Waste Electrical and Electronic Equipment (WEEE) Regulations 2013 in the UK. For this purpose, collection points for recycling centres and take-back systems (CRSO) are available from retailers or private disposal companies, which accept separate control gear and light sources free of charge. In this way, raw materials are conserved and materials are recycled.
Intended for use with LED modules.
The forward voltage of the LED light source shall be within the defined operating window of the control gear in all operating conditions including dimming if applicable.
Separate control gear and light sources must be disposed of at certified disposal companies in accordance with Directive 2012/19/EU (WEEE) in the EU and with Waste Electrical and Electronic Equipment (WEEE) Regulations 2013 in the UK. For this purpose, collection points for recycling centres and take-back systems (CRSO) are available from retailers or private disposal companies, which accept separate control gear and light sources free of charge. In this way, raw materials are conserved and materials are recycled.