OPTOTRONIC Intelligent – DALI NFC LP
Características do produto
- Tensão de alimentação: 220…240 V
- Frequência da linha: 0 Hz | 50 Hz | 60 Hz
- Tensão da linha: 198…264 V
Benefícios do produto
- Driver de janela DALI versátil devido à saída com caraxcteristica flexível
- DALI-2 certified incl. Parts 251, 252, 253
- Easy to use in corridors and restrooms because of three-level Corridor function
- Touch DIM application: easy to control via pushbutton or sensor
Produtos
| Nome do produto |
|
|
|
|
|
Ficha de dados do produto | ||
|---|---|---|---|---|---|---|---|---|
|
OTi DALI 10/220…240/700 NFC
|
2.5…45 V | 150…700 mA | 1240 mm | 310 mm | 210 mm | ||
|
OTi DALI 15/220...240/1A0 NFC LP
|
10…54 V | 150…1050 mA | 97,0 mm | 42,5 mm | 22,0 mm | ||
|
OTi DALI 25/220...240/700 NFC LP
|
10…54 V | 180…700 mA | 97,0 mm | 42,5 mm | 22,0 mm | ||
|
OTi DALI 40/220...240/1A0 NFC LP
|
10…54 V | 350…1050 mA | 97,0 mm | 42,5 mm | 22,0 mm | ||
|
OTi DALI 50/220...240/1A4 NFC LP
|
15…54 V | 600…1400 mA | 103,0 mm | 67,0 mm | 22,5 mm |
Mais sobre a família de produtos
Áreas de aplicação
- Indicado para uso em luminárias com possibilidade de definição da corrente
- Instalação em sistemas de iluminação de emergência conforme IEC 61347-2-13, anexo J
- Indicado para instalações de interior com SELV
- Adequado para luminárias de classes de proteção I e II
Ecodesign regulation information:
Intended for use with LED modules.
The forward voltage of the LED light source shall be within the defined operating window of the control gear in all operating conditions including dimming if applicable.
Separate control gear and light sources must be disposed of at certified disposal companies in accordance with Directive 2012/19/EU (WEEE) in the EU and with Waste Electrical and Electronic Equipment (WEEE) Regulations 2013 in the UK. For this purpose, collection points for recycling centres and take-back systems (CRSO) are available from retailers or private disposal companies, which accept separate control gear and light sources free of charge. In this way, raw materials are conserved and materials are recycled.
Intended for use with LED modules.
The forward voltage of the LED light source shall be within the defined operating window of the control gear in all operating conditions including dimming if applicable.
Separate control gear and light sources must be disposed of at certified disposal companies in accordance with Directive 2012/19/EU (WEEE) in the EU and with Waste Electrical and Electronic Equipment (WEEE) Regulations 2013 in the UK. For this purpose, collection points for recycling centres and take-back systems (CRSO) are available from retailers or private disposal companies, which accept separate control gear and light sources free of charge. In this way, raw materials are conserved and materials are recycled.