OPTOTRONIC Intelligent DALI NFC
Características do produto
- Tensão de alimentação: 220 240 V
- Frequência da linha: 0 Hz | 50 Hz | 60 Hz
- Tensão da linha: 198 264 V
- Segurança conforme EN 61347-1, 61347-2-13, 62384
- Supressão de RI: até EN 55015/CISPR 15
- Imunidade conforme EN 61547
Benefícios do produto
- Driver de janela DALI versátil devido à saída com caraxcteristica flexível
- DALI-2 certified incl. Parts 251, 252, 253
Produtos
Nome do produto |
|
|
|
|
|
Ficha de dados do produto | ||
---|---|---|---|---|---|---|---|---|
OTi DALI 15/220...240/1A0 NFC
|
7,5 54 V | 150 1050 mA | 95,0 mm | 53,0 mm | 30,0 mm | |||
OTi DALI 25/220
240/700 NFC
|
15 54 V | 180 700 mA | 103,0 mm | 67,0 mm | 29,5 mm | |||
OTi DALI 35/220
240/1A0 NFC
|
15 54 V | 350 1050 mA | 103,0 mm | 67,0 mm | 29,5 mm | |||
OTi DALI 50/220...240/1A4 NFC
|
15 54 V | 600 1400 mA | 110,0 mm | 75,0 mm | 25,0 mm |
Mais sobre a família de produtos
Áreas de aplicação
- Instalação em sistemas de iluminação de emergência conforme IEC 61347-2-13, anexo J
- Indicado para uso em luminárias com possibilidade de definição da corrente
- Indicado para instalações de interior com SELV
- Adequado para luminárias de classes de proteção I e II
- Instalação através de Cable Clamp Kit possível (depende da versão do produto)
Ecodesign regulation information:
Intended for use with LED modules.
The forward voltage of the LED light source shall be within the defined operating window of the control gear in all operating conditions including dimming if applicable.
Separate control gear and light sources must be disposed of at certified disposal companies in accordance with Directive 2012/19/EU (WEEE) in the EU and with Waste Electrical and Electronic Equipment (WEEE) Regulations 2013 in the UK. For this purpose, collection points for recycling centres and take-back systems (CRSO) are available from retailers or private disposal companies, which accept separate control gear and light sources free of charge. In this way, raw materials are conserved and materials are recycled.
Intended for use with LED modules.
The forward voltage of the LED light source shall be within the defined operating window of the control gear in all operating conditions including dimming if applicable.
Separate control gear and light sources must be disposed of at certified disposal companies in accordance with Directive 2012/19/EU (WEEE) in the EU and with Waste Electrical and Electronic Equipment (WEEE) Regulations 2013 in the UK. For this purpose, collection points for recycling centres and take-back systems (CRSO) are available from retailers or private disposal companies, which accept separate control gear and light sources free of charge. In this way, raw materials are conserved and materials are recycled.