OPTOTRONIC FIT CS Track
Características do produto
- Tensão de alimentação: 220…240 V
- Frequência da linha: 50 Hz | 60 Hz
- Tensão da linha: 198…264 V
- Lifetime: up to 50,000 h (temperature at Tc = 75 °C, max. 10 % failure rate)
Benefícios do produto
- High flexibility due to four different output currents per type
Produtos
| Nome do produto |
|
|
|
|
|
Ficha de dados do produto | ||
|---|---|---|---|---|---|---|---|---|
|
OT FIT 20/220-240/500 CS T-B
|
25…42 V | 250 / 350 / 450 / 500 mA | 162,0 mm | 32,0 mm | 41 mm | ||
|
OT FIT 20/220-240/500 CS T-G
|
25…42 V | 250 / 350 / 450 / 500 mA | 162,0 mm | 32,0 mm | 41 mm | ||
|
OT FIT 20/220-240/500 CS T-W
|
25…42 V | 250 / 350 / 450 / 500 mA | 162,0 mm | 32,0 mm | 41 mm | ||
|
OT FIT 30/220-240/800 CS T-B
|
25…42 V | 600 / 700 / 750 / 800 mA | 162,0 mm | 32,0 mm | 41 mm | ||
|
OT FIT 30/220-240/800 CS T-G
|
25…42 V | 600 / 700 / 750 / 800 mA | 1620 mm | 320 mm | 41 mm | ||
|
OT FIT 30/220-240/800 CS T-W
|
25…42 V | 600 / 700 / 750 / 800 mA | 162,0 mm | 32,0 mm | 41 mm | ||
|
|
OT FIT 40/220-240/1A0 CS T-B
|
27…42 V | 850 / 900 / 950 / 1050 mA | 162,0 mm | 32,0 mm | 41 mm | ||
|
OT FIT 40/220-240/1A0 CS T-G
|
27…42 V | 850 / 900 / 950 / 1050 mA | 1620 mm | 320 mm | 41 mm | ||
|
OT FIT 40/220-240/1A0 CS T-W
|
27…42 V | 850 / 900 / 950 / 1050 mA | 1620 mm | 320 mm | 41 mm |
Mais sobre a família de produtos
Ecodesign regulation information:
Intended for use with LED modules.
The forward voltage of the LED light source shall be within the defined operating window of the control gear in all operating conditions including dimming if applicable.
Separate control gear and light sources must be disposed of at certified disposal companies in accordance with Directive 2012/19/EU (WEEE) in the EU and with Waste Electrical and Electronic Equipment (WEEE) Regulations 2013 in the UK. For this purpose, collection points for recycling centres and take-back systems (CRSO) are available from retailers or private disposal companies, which accept separate control gear and light sources free of charge. In this way, raw materials are conserved and materials are recycled.
Intended for use with LED modules.
The forward voltage of the LED light source shall be within the defined operating window of the control gear in all operating conditions including dimming if applicable.
Separate control gear and light sources must be disposed of at certified disposal companies in accordance with Directive 2012/19/EU (WEEE) in the EU and with Waste Electrical and Electronic Equipment (WEEE) Regulations 2013 in the UK. For this purpose, collection points for recycling centres and take-back systems (CRSO) are available from retailers or private disposal companies, which accept separate control gear and light sources free of charge. In this way, raw materials are conserved and materials are recycled.