OPTOTRONIC FIT NFC
Características do produto
- Output current range 150-1050 mA
- NFC Interface
- Low LF-ripple < 5%
Benefícios do produto
- Fast programming / current set via NFC*
Produtos
| Nome do produto |
|
|
|
|
|
Ficha de dados do produto | ||
|---|---|---|---|---|---|---|---|---|
|
OT FIT 15/220-240/350 NFC
|
18…40 V | 150…350 mA | 97,0 mm | 43,0 mm | 29,5 mm | ||
|
OT FIT 25/220-240/700 NFC
|
18…40 V | 350…700 mA | 97,0 mm | 43,0 mm | 29,5 mm | ||
|
|
OT FIT 40/220-240/1A0 NFC
|
18…40 V | 700...1050 mA | 97,0 mm | 43,0 mm | 29,5 mm |
Mais sobre a família de produtos
Áreas de aplicação
- Spot light and down light
- Escritórios
- Shops
- Hospitalidade
Ecodesign regulation information:
Intended for use with LED modules.
The forward voltage of the LED light source shall be within the defined operating window of the control gear in all operating conditions including dimming if applicable.
Separate control gear and light sources must be disposed of at certified disposal companies in accordance with Directive 2012/19/EU (WEEE) in the EU and with Waste Electrical and Electronic Equipment (WEEE) Regulations 2013 in the UK. For this purpose, collection points for recycling centres and take-back systems (CRSO) are available from retailers or private disposal companies, which accept separate control gear and light sources free of charge. In this way, raw materials are conserved and materials are recycled.
Intended for use with LED modules.
The forward voltage of the LED light source shall be within the defined operating window of the control gear in all operating conditions including dimming if applicable.
Separate control gear and light sources must be disposed of at certified disposal companies in accordance with Directive 2012/19/EU (WEEE) in the EU and with Waste Electrical and Electronic Equipment (WEEE) Regulations 2013 in the UK. For this purpose, collection points for recycling centres and take-back systems (CRSO) are available from retailers or private disposal companies, which accept separate control gear and light sources free of charge. In this way, raw materials are conserved and materials are recycled.