OPTOTRONIC - 4DIM NFC IP20
Características do produto
- Tensão de alimentação: 220 240 V
- Faixa de saída de corrente: 70 1.050 mA
- Flexibilidade de definição de corrente com um cabo adicional (LEDset2)
- Permite economia de energia nas fases de crepúsculo
- Função DIM de tensão de rede para regulação através de corte de fase
- Interface isolado DALI para sistemas de telegestão bidirecional
- Standby power consumption: < 0.35 W
- Proteção contra sobreaquecimento através de NTC externo
Benefícios do produto
- Funcionalidade 4DIM num dispositivo (StepDIM, AstroDIM, MainsDIM, DALI)
- DALI-2 certified incl. Parts 251, 252, 253
- Grande flexibilidade devido à ampla temperatura de funcionamento de -40 ... 55 ° C ou 60 ºC
- Proteção através do duplo isolamento entre a entrada de corrente e saída LED
Produtos
Nome do produto |
|
|
|
|
Ficha de dados do produto | ||
---|---|---|---|---|---|---|---|
OT 20/170
240/1A0 4DIMLT2 G2 CE
|
200 1050 mA | 1230 mm | 790 mm | 330 mm | |||
OT 40/170
240/1A0 4DIMLT2 G2 CE
|
200 1050 mA | 1230 mm | 790 mm | 330 mm | |||
OT 75/170
240/1A0 4DIMLT2 G2 CE
|
200 1050 mA | 1330 mm | 770 mm | 400 mm | |||
OT 110/170
240/1A0 4DIMLT2 G2 CE
|
200 1050 mA | 1500 mm | 900 mm | 400 mm | |||
OT 165/170...240/1A0 4DIMLT2 G2 CE
|
200 1050 mA | 1700 mm | 1000 mm | 400 mm |
Mais sobre a família de produtos
Áreas de aplicação
- Iluminação viária e urbana
- Indústria
- Indicado para aplicações de exterior em luminárias com IP > 54
- Indicado para uso em luminárias de exterior com classe de proteção I e II
Ecodesign regulation information:
Intended for use with LED modules.
The forward voltage of the LED light source shall be within the defined operating window of the control gear in all operating conditions including dimming if applicable.
Separate control gear and light sources must be disposed of at certified disposal companies in accordance with Directive 2012/19/EU (WEEE) in the EU and with Waste Electrical and Electronic Equipment (WEEE) Regulations 2013 in the UK. For this purpose, collection points for recycling centres and take-back systems (CRSO) are available from retailers or private disposal companies, which accept separate control gear and light sources free of charge. In this way, raw materials are conserved and materials are recycled.
Intended for use with LED modules.
The forward voltage of the LED light source shall be within the defined operating window of the control gear in all operating conditions including dimming if applicable.
Separate control gear and light sources must be disposed of at certified disposal companies in accordance with Directive 2012/19/EU (WEEE) in the EU and with Waste Electrical and Electronic Equipment (WEEE) Regulations 2013 in the UK. For this purpose, collection points for recycling centres and take-back systems (CRSO) are available from retailers or private disposal companies, which accept separate control gear and light sources free of charge. In this way, raw materials are conserved and materials are recycled.