ELEMENT EM FIT Non SELV
Características do produto
- Frequência da linha: 50 Hz | 60 Hz
- Tensão de alimentação: 220…240 V
- Wide output voltage range
- Fixed output (no dimming)
Benefícios do produto
- Estrutura compacta
- High efficiency and reliability
- High light quality due to low ripple current
- Long lasting and high reliability
Produtos
| Nome do produto |
|
|
|
|
|
Ficha de dados do produto | ||
|---|---|---|---|---|---|---|---|---|
|
|
EM FIT 18/220…240/350 D CS L
|
27...54 V | 200 / 250 / 300 / 350 mA | 210,0 mm | 30,0 mm | 21,0 mm | ||
|
EM FIT 40/220...240/350 D CS L
|
40…120 V | 200 / 250 / 300 / 350 mA | 2100 mm | 300 mm | 210 mm |
Mais sobre a família de produtos
Áreas de aplicação
- Iluminação de lojas
- Industry lighting
Ecodesign regulation information:
Intended for use with LED modules.
The forward voltage of the LED light source shall be within the defined operating window of the control gear in all operating conditions including dimming if applicable.
Separate control gear and light sources must be disposed of at certified disposal companies in accordance with Directive 2012/19/EU (WEEE) in the EU and with Waste Electrical and Electronic Equipment (WEEE) Regulations 2013 in the UK. For this purpose, collection points for recycling centres and take-back systems (CRSO) are available from retailers or private disposal companies, which accept separate control gear and light sources free of charge. In this way, raw materials are conserved and materials are recycled.
Intended for use with LED modules.
The forward voltage of the LED light source shall be within the defined operating window of the control gear in all operating conditions including dimming if applicable.
Separate control gear and light sources must be disposed of at certified disposal companies in accordance with Directive 2012/19/EU (WEEE) in the EU and with Waste Electrical and Electronic Equipment (WEEE) Regulations 2013 in the UK. For this purpose, collection points for recycling centres and take-back systems (CRSO) are available from retailers or private disposal companies, which accept separate control gear and light sources free of charge. In this way, raw materials are conserved and materials are recycled.