LF500-G1-840-10 L2
Dados Técnicos
Dados elétricos
Tensão nominal
24,0 V
Tipo de corrente
Corrente contínua (DC)
Potência nominal por metro
3,9 W
potência nominal
39,00 W
Gama de tensão de entrada
23 25 V
Accidental reverse input voltage protection up to
25 V
Dados fotométricos
Índice de reprodução de cor Ra
>80
Fluxo luminoso por metro
520 lm
Fluxo luminoso útil total
5200 lm
Rendimento luminoso
133 lm/W
Desvio padrão de combinação de cores
≤3 sdcm
Tonalidade (designação)
4000 K
Temperatura de cor
4000 K
Temperatura de cor
4000 K
Dados luminotécnicos
LED pitch
14.29 mm
Ângulo de abertura
120 °
Tempo de ligamento
< 0,5 s
Tempo de aquecimento (60 %)
< 0,50 s
Informação sobre módulos LED
Número de LEDs por metro
70
Número de LEDs por menor unidade
7
Dimensões e peso
Comprimento
10000,0 mm
Comprimento da menor unidade
100,0 mm
Peso do produto
86,40 g
Largura
8,00 mm
Secção do cabo, primário
0.51 mm²
Altura
1,40 mm
Temperaturas e condições de funcionamento
Temp. funcionamento, conforme IEC 62717
35 °C
Gama de temperatura no funcionamento
-30 75 °C
Temperatura ambiente
-30 +50 °C
Temperatura de armazenagem
-40 +85 °C
Vida útil
Vida
60000 h
Vida nominal
60000 h
Manutenção de Lumen (fim vida nominal)
0,70
Número de ciclos de Liga e Desliga
15000
Informação adicional do produto
EAN sucessor
4052899575233
ID of contained light source [AGGR]
LS_TRV_274089
Atributos
Lowest bending radius
20 mm
Self-adhesive
Sim
With connection set
Não
With end piece
Não
Normas e Certificações
Consumo de energia
43 kWh/1000h
Normas
CE/UL/ENEC/EAC
Tipo de protecção
IP20
Energy efficiency class of the contained light source
E
Dados logísticos
Código do material
85395100000
Environmental information
Information according Art. 33 of EU Regulation (EC) 1907/2006 (REACh)
Date of Declaration
07-07-2023
Primary Article Identifier
4062172142373
Candidate List Substance 1
Lead
CAS No. of substance 1
7439-92-1
Safe Use Instruction
The identification of the Candidate List substance is sufficient to allow safe use of the article.
Declaration No. in SCIP database
0e759a3b-d142-4785-a773-00aee3c6f638
Informações de embalagem
EAN |
Unidade |
Peça |
Dimensões |
Peso |
Volume |
---|---|---|---|---|---|
4062172142373 |
FS
| 1 | 186mm x 190mm x 29mm | 179.00g | 1.02dm³ |
4062172142380 |
VS
| 8 | 241mm x 195mm x 205mm | 1624.00g | 9.63dm³ |
Downloads
Acessórios opcionais
Mais sobre a família de produtos
Ecodesign regulation information:
- This product is considered to be a "containing product" in the sense of Regulations (EU) 2019/2020 and (EU) 2019/2015.
- Tolerances of the reported values, are according to LED Modules Performance standard IEC/EN 62717.
- In general, the replacement of the contained light sources without permanent damage to the product with the use of common available tools is possible in the final application when they can be dismantled from the installation environment and substituted for the necessary number of light sources restoring its full electrical/mechanical/thermal/optical functionality by means of a professional installer.
In the contrary, and limited to the LINEARlight Flex Diffuse, LINEARlight Rigid Finesse, GINO LED Flex Diffuse and LUMINENT Milky product families, the contained light source is an integrated part of the containing product and its removal can only be done by causing a permanent damage to the containing product due to its tight mechanical, electrical, optical, thermal interaction and/or environmental protection with or from the containing product. Therefore, a replacement of the light source with the use of common available tools is not justified. - Dismantling of light sources from containing products at end of life: Containing products with light sources which are scalable in length can be cut to the length of the contained light source and if applicable mechanically detached from protective and/or optical covers. Containing products shall be separated from building material and/or from other additional mounting accessories by means of a professional installer.
Separate control gear and light sources must be disposed of at certified disposal companies in accordance with Directive 2012/19/EU (WEEE) in the EU and with Waste Electrical and Electronic Equipment (WEEE) Regulations 2013 in the UK. For this purpose, collection points for recycling centres and take-back systems (CRSO) are available from retailers or private disposal companies, which accept separate control gear and light sources free of charge. In this way, raw materials are conserved and materials are recycled.
Produtos
Nome do produto |
|
|
Ficha de dados do produto | ||
---|---|---|---|---|---|
LF500-G1-925-10 L2
|
≥90 | 400 lm | |||
LF500-G1-927-10 L2
|
≥90 | 400 lm | |||
LF500-G1-930-10 L2
|
≥90 | 400 lm | |||
LF500-G1-940-10 L2
|
≥90 | 440 lm | |||
LF500-G1-840-10 L2
|
>80 | 520 lm |