LFP500-G1-930-10 L1
.jpg)
.jpg)
Benefícios do produto
- Type of protection: IP68 due to high performance silicon
Dados Técnicos
Dados elétricos
Tensão nominal
240 V
Tipo de corrente
Corrente contínua (DC)
Potência nominal por metro
3,8 W
potência nominal
3800 W
Gama de tensão de entrada
23…25 V
Accidental reverse input voltage protection up to
25 V
Dados fotométricos
Cor da luz do LED
branco
Índice de reprodução de cor Ra
≥90
Fluxo luminoso por metro
400 lm
Fluxo luminoso útil total
4000 lm
Rendimento luminoso
105 lm/W
Desvio padrão de combinação de cores
≤3 sdcm
Tonalidade (designação)
3000 K
Temperatura de cor
3150 K
Dados luminotécnicos
LED pitch
14.29 mm
Ângulo de abertura
120 °
Tempo de ligamento
< 05 s
Tempo de aquecimento (60 %)
< 050 s
Informação sobre módulos LED
Número de LEDs por metro
70
Número de LEDs por menor unidade
7
Dimensões e peso
Comprimento
100000 mm
Comprimento da menor unidade
100,0 mm
Largura
111 mm
Altura
450 mm
Comprimento do cabo
5000
Peso do produto
56000 g
Secção do cabo, primário
0,5 mm²
Temperaturas e condições de funcionamento
Temp. funcionamento, conforme IEC 62717
35 °C
Gama de temperatura no funcionamento
-30…70 °C
Temperatura de armazenagem
-40…85 °C
Vida útil
Vida
60000 h
Vida nominal
60000 h
Manutenção de Lumen (fim vida nominal)
070
Número de ciclos de Liga e Desliga
15000
Informação adicional do produto
ID of contained light source [AGGR]
LS_TRV_286555
Atributos
Lowest bending radius
50 mm
Self-adhesive
Sim
With connection set
Não
With end piece
Não
Normas e Certificações
Consumo de energia
43 kWh/1000h
Normas
CE/UL/ENEC/EAC
Tipo de protecção
IP68
Energy efficiency class of the contained light source
F
Dados logísticos
Código do material
85395100000
Environmental information
Information according Art. 33 of EU Regulation (EC) 1907/2006 (REACh)
Date of Declaration
02-06-2023
Primary Article Identifier
4062172283182
Candidate List Substance 1
Lead
CAS No. of substance 1
7439-92-1
Safe Use Instruction
The identification of the Candidate List substance is sufficient to allow safe use of the article.
Declaration No. in SCIP database
dcc9edea-4f7d-4ba5-9c0f-2c7656bf424f
Informações de embalagem
EAN |
Unidade |
Peça |
Dimensões |
Peso |
Volume |
|---|---|---|---|---|---|
| 4062172283182 |
FS
| 1 | 353mm x 349mm x 32mm | 1039.00g | 3.94dm³ |
| 4062172283199 |
VS
| 8 | 365mm x 286mm x 366mm | 8698.00g | 38.21dm³ |
Downloads
Fichas técnicas
Acessórios opcionais
Mais sobre a família de produtos
Ecodesign regulation information:
- This product is considered to be a "containing product" in the sense of Regulations (EU) 2019/2020 and (EU) 2019/2015.
- Tolerances of the reported values, are according to LED Modules Performance standard IEC/EN 62717.
- In general, the replacement of the contained light sources without permanent damage to the product with the use of common available tools is possible in the final application when they can be dismantled from the installation environment and substituted for the necessary number of light sources restoring its full electrical/mechanical/thermal/optical functionality by means of a professional installer.
In the contrary, and limited to the LINEARlight Flex Diffuse, LINEARlight Rigid Finesse, GINO LED Flex Diffuse and LUMINENT Milky product families, the contained light source is an integrated part of the containing product and its removal can only be done by causing a permanent damage to the containing product due to its tight mechanical, electrical, optical, thermal interaction and/or environmental protection with or from the containing product. Therefore, a replacement of the light source with the use of common available tools is not justified. - Dismantling of light sources from containing products at end of life: Containing products with light sources which are scalable in length can be cut to the length of the contained light source and if applicable mechanically detached from protective and/or optical covers. Containing products shall be separated from building material and/or from other additional mounting accessories by means of a professional installer.
Separate control gear and light sources must be disposed of at certified disposal companies in accordance with Directive 2012/19/EU (WEEE) in the EU and with Waste Electrical and Electronic Equipment (WEEE) Regulations 2013 in the UK. For this purpose, collection points for recycling centres and take-back systems (CRSO) are available from retailers or private disposal companies, which accept separate control gear and light sources free of charge. In this way, raw materials are conserved and materials are recycled.
Produtos
| Nome do produto |
|
|
|
|
Ficha de dados do produto | ||
|---|---|---|---|---|---|---|---|
|
|
LFP500-G1-927-10 L1
|
2700 K | 2660 K | ≥90 | 380 lm | ||
|
|
LFP500-G1-930-10 L1
|
3000 K | 3150 K | ≥90 | 400 lm | ||
|
|
LFP500-G1-940-10 L1
|
4000 K | 3960 K | ≥90 | 430 lm |