OPTOTRONIC - 1DIM NFC IP20 G3
Características do produto
- Tensão de alimentação: 220…240 V
- Flexibilidade de definição de corrente com um cabo adicional (LEDset2)
- Permite economia de energia nas fases de crepúsculo
- Standby power consumption: < 0.35 W
- Wide current output range: 150 mA…1050 mA
Benefícios do produto
- Grande flexibilidade devido à ampla temperatura de funcionamento de -40 ... 55 ° C ou 60 ºC
- Proteção através do duplo isolamento entre a entrada de corrente e saída LED
- Optimized NFC for programming from the top: easy accessibility in luminaires
Produtos
| Nome do produto |
|
|
|
|
Ficha de dados do produto | ||
|---|---|---|---|---|---|---|---|
|
OT 20/170-240/1A0 1DIM NFC G3 CE
|
150…1050 mA | 123,0 mm | 79,0 mm | 33,0 mm | ||
|
OT 40/170-240/0A7 1DIM NFC G3 CE
|
150…700 mA | 123,0 mm | 79,0 mm | 33,0 mm | ||
|
OT 40/170-240/1A0 1DIM NFC G3 CE
|
150…1050 mA | 123,0 mm | 79,0 mm | 33,0 mm | ||
|
OT 75/170…240/0A7 1DIM NFC G3 CE
|
150…700 mA | 123,0 mm | 79,0 mm | 33,0 mm | ||
|
OT 75/170-240/1A0 1DIM NFC G3 CE
|
150…1050 mA | 123,0 mm | 79,0 mm | 33,0 mm | ||
|
OT 110/170-240/0A7 1DIM NFC G3 CE
|
150…700 mA | 133,0 mm | 77,0 mm | 40,0 mm | ||
|
OT 110/170-240/1A0 1DIM NFC G3 CE
|
150…1050 mA | 133,0 mm | 77,0 mm | 40,0 mm | ||
|
OT 165/170-240/1A0 1DIM NFC G3 CE
|
150…1050 mA | 150,0 mm | 90,0 mm | 40,0 mm |
Mais sobre a família de produtos
Áreas de aplicação
- Iluminação viária e urbana
- Indústria
- Indicado para aplicações de exterior em luminárias com IP > 54
- Indicado para uso em luminárias de exterior com classe de proteção I e II
Ecodesign regulation information:
Intended for use with LED modules.
The forward voltage of the LED light source shall be within the defined operating window of the control gear in all operating conditions including dimming if applicable.
Separate control gear and light sources must be disposed of at certified disposal companies in accordance with Directive 2012/19/EU (WEEE) in the EU and with Waste Electrical and Electronic Equipment (WEEE) Regulations 2013 in the UK. For this purpose, collection points for recycling centres and take-back systems (CRSO) are available from retailers or private disposal companies, which accept separate control gear and light sources free of charge. In this way, raw materials are conserved and materials are recycled.
Intended for use with LED modules.
The forward voltage of the LED light source shall be within the defined operating window of the control gear in all operating conditions including dimming if applicable.
Separate control gear and light sources must be disposed of at certified disposal companies in accordance with Directive 2012/19/EU (WEEE) in the EU and with Waste Electrical and Electronic Equipment (WEEE) Regulations 2013 in the UK. For this purpose, collection points for recycling centres and take-back systems (CRSO) are available from retailers or private disposal companies, which accept separate control gear and light sources free of charge. In this way, raw materials are conserved and materials are recycled.