OPTOTRONIC - 2DIM High Power IP67 AUX12
Características do produto
- Available with different wattage: 400 W, 600 W
- Tensão de alimentação: 220 240 V
- AUX 12V output for sensor and wireless node
- Wide output current range
- Duração: até 100,000 h (a T = 75 °C a Tc)
Benefícios do produto
- Easily programmable by OT Programmer-S; (AstroDIM / Constant lumen)
- Eficiente e fiável
- 2DIM functionality in one device (AstroDIM, 1 10 V)
- Proteção contra surtos alta: até 10 kV
- Grande flexibilidade devido à ampla temperatura de funcionamento de -40 ... 55 ° C
- Lifetime: up to 100,000 h
- 5 years guarantee
Produtos
Nome do produto |
|
|
|
|
Ficha de dados do produto | ||
---|---|---|---|---|---|---|---|
OT 600/220...240/ 2A1 2DIM P7 AUX12
|
1750 2100 mA | 2610 mm | 1250 mm | 435 mm | |||
OT 400/220...240/ 1A4 2DIM P7 AUX12
|
1050 1400 mA | 2520 mm | 895 mm | 445 mm |
Mais sobre a família de produtos
Áreas de aplicação
- Area lighting
- Stadium lighting
- Horticulture lighting
- Iluminação viária e urbana
- Adequado para luminárias de classe de proteção I
Referências / Links
* For more information on the multi-level guarantee and the terms and conditions of the guarantee visit https://www.inventronics-light.com/multilevel-guarantees
Ecodesign regulation information:
Intended for use with LED modules.
The forward voltage of the LED light source shall be within the defined operating window of the control gear in all operating conditions including dimming if applicable.
Separate control gear and light sources must be disposed of at certified disposal companies in accordance with Directive 2012/19/EU (WEEE) in the EU and with Waste Electrical and Electronic Equipment (WEEE) Regulations 2013 in the UK. For this purpose, collection points for recycling centres and take-back systems (CRSO) are available from retailers or private disposal companies, which accept separate control gear and light sources free of charge. In this way, raw materials are conserved and materials are recycled.
Intended for use with LED modules.
The forward voltage of the LED light source shall be within the defined operating window of the control gear in all operating conditions including dimming if applicable.
Separate control gear and light sources must be disposed of at certified disposal companies in accordance with Directive 2012/19/EU (WEEE) in the EU and with Waste Electrical and Electronic Equipment (WEEE) Regulations 2013 in the UK. For this purpose, collection points for recycling centres and take-back systems (CRSO) are available from retailers or private disposal companies, which accept separate control gear and light sources free of charge. In this way, raw materials are conserved and materials are recycled.